FIRE TABLE
This amenity guide is our companion for getting the fire table functioning.
1
Plug in the electrical cord
Find the nearest electrical outlet, and plug into it to power the igniter.
2
Do a safety check
Before ignition, make sure there’s nothing around the fire table that can be harmed by the fire.
3
Start the fire table
Press the ignition switch from the neutral position (i.e., the “o” option) to the up position (i.e., the “–” option). In sequence, we should hear one beep from the electrical module, hear the igniter start clicking, hear the propane flowing, and the flame should appear. Enjoy the warmth.
If there’s no flame, we may have to open up the valve on the propane container located under the fire table.
4
Turn off the fire table
When finished using the fire table, we put the igniter switch back into the neutral position so the flame turns off, and we unplug the electrical cord.
